Festool Sander Paper Alignment Tool- ETS/ETSC/Rotex 125mm/150mm
$15.95
Welcome to BadYorkie Woodworking!
This alignment jig allows you to place your Festool Granat abrasive paper perfectly and precisely every-time! This will align the dust extraction holes exactly where they need to be while center the pad for optimal operation. These are compatible with all ETS, ETSC, and Rotex sanders manufactured by Festool.
Super easy steps:
1. Remove old Granat paper from sander
2. Place new Granat paper (Hook and Loop side up) onto jig with all alignment dowels passing through matching holes on paper
3. Place jig onto hook and loop pad on sander firmly sandwiching Granat paper between; aligning dowels with dust extraction vents on sander
4. Remove jig leaving paper behind
5. Go Sanding!!!
Please see video for quick operation guide.
Specific colors may be available by request- send message before order for confirmation, normally ships with varied colors that are currently in inventory. Normal colors shipped are Blue and Green, but depending on stock other colors may ship based on availability.
These jigs have been designed to be super strong and ready for years of hard work keeping your sanders operating smoothly! The jig bodies are manufactured here in-house in Eagle River, Alaska by a Veteran owned business. Custom designed and tested with the latest 3-D printing technology.
125mm jig is specifically for the ETS/ETSC/Rotex 125mm (5") Sander Models
150mm jig is specifically for the ETS/ETSC/Rotex 150mm (6") Sander Models
Both are designed to be used with Festool brand sand paper discs.
Thanks!
This alignment jig allows you to place your Festool Granat abrasive paper perfectly and precisely every-time! This will align the dust extraction holes exactly where they need to be while center the pad for optimal operation. These are compatible with all ETS, ETSC, and Rotex sanders manufactured by Festool.
Super easy steps:
1. Remove old Granat paper from sander
2. Place new Granat paper (Hook and Loop side up) onto jig with all alignment dowels passing through matching holes on paper
3. Place jig onto hook and loop pad on sander firmly sandwiching Granat paper between; aligning dowels with dust extraction vents on sander
4. Remove jig leaving paper behind
5. Go Sanding!!!
Please see video for quick operation guide.
Specific colors may be available by request- send message before order for confirmation, normally ships with varied colors that are currently in inventory. Normal colors shipped are Blue and Green, but depending on stock other colors may ship based on availability.
These jigs have been designed to be super strong and ready for years of hard work keeping your sanders operating smoothly! The jig bodies are manufactured here in-house in Eagle River, Alaska by a Veteran owned business. Custom designed and tested with the latest 3-D printing technology.
125mm jig is specifically for the ETS/ETSC/Rotex 125mm (5") Sander Models
150mm jig is specifically for the ETS/ETSC/Rotex 150mm (6") Sander Models
Both are designed to be used with Festool brand sand paper discs.
Thanks!
Jig Size:
Quantity:
Welcome to BadYorkie Woodworking!
This alignment jig allows you to place your Festool Granat abrasive paper perfectly and precisely every-time! This will align the dust extraction holes exactly where they need to be while center the pad for optimal operation. These are compatible with all ETS, ETSC, and Rotex sanders manufactured by Festool.
Super easy steps:
1. Remove old Granat paper from sander
2. Place new Granat paper (Hook and Loop side up) onto jig with all alignment dowels passing through matching holes on paper
3. Place jig onto hook and loop pad on sander firmly sandwiching Granat paper between; aligning dowels with dust extraction vents on sander
4. Remove jig leaving paper behind
5. Go Sanding!!!
Please see video for quick operation guide.
Specific colors may be available by request- send message before order for confirmation, normally ships with varied colors that are currently in inventory. Normal colors shipped are Blue and Green, but depending on stock other colors may ship based on availability.
These jigs have been designed to be super strong and ready for years of hard work keeping your sanders operating smoothly! The jig bodies are manufactured here in-house in Eagle River, Alaska by a Veteran owned business. Custom designed and tested with the latest 3-D printing technology.
125mm jig is specifically for the ETS/ETSC/Rotex 125mm (5") Sander Models
150mm jig is specifically for the ETS/ETSC/Rotex 150mm (6") Sander Models
Both are designed to be used with Festool brand sand paper discs.
Thanks!
This alignment jig allows you to place your Festool Granat abrasive paper perfectly and precisely every-time! This will align the dust extraction holes exactly where they need to be while center the pad for optimal operation. These are compatible with all ETS, ETSC, and Rotex sanders manufactured by Festool.
Super easy steps:
1. Remove old Granat paper from sander
2. Place new Granat paper (Hook and Loop side up) onto jig with all alignment dowels passing through matching holes on paper
3. Place jig onto hook and loop pad on sander firmly sandwiching Granat paper between; aligning dowels with dust extraction vents on sander
4. Remove jig leaving paper behind
5. Go Sanding!!!
Please see video for quick operation guide.
Specific colors may be available by request- send message before order for confirmation, normally ships with varied colors that are currently in inventory. Normal colors shipped are Blue and Green, but depending on stock other colors may ship based on availability.
These jigs have been designed to be super strong and ready for years of hard work keeping your sanders operating smoothly! The jig bodies are manufactured here in-house in Eagle River, Alaska by a Veteran owned business. Custom designed and tested with the latest 3-D printing technology.
125mm jig is specifically for the ETS/ETSC/Rotex 125mm (5") Sander Models
150mm jig is specifically for the ETS/ETSC/Rotex 150mm (6") Sander Models
Both are designed to be used with Festool brand sand paper discs.
Thanks!
Welcome to BadYorkie Woodworking!
This alignment jig allows you to place your Festool Granat abrasive paper perfectly and precisely every-time! This will align the dust extraction holes exactly where they need to be while center the pad for optimal operation. These are compatible with all ETS, ETSC, and Rotex sanders manufactured by Festool.
Super easy steps:
1. Remove old Granat paper from sander
2. Place new Granat paper (Hook and Loop side up) onto jig with all alignment dowels passing through matching holes on paper
3. Place jig onto hook and loop pad on sander firmly sandwiching Granat paper between; aligning dowels with dust extraction vents on sander
4. Remove jig leaving paper behind
5. Go Sanding!!!
Please see video for quick operation guide.
Specific colors may be available by request- send message before order for confirmation, normally ships with varied colors that are currently in inventory. Normal colors shipped are Blue and Green, but depending on stock other colors may ship based on availability.
These jigs have been designed to be super strong and ready for years of hard work keeping your sanders operating smoothly! The jig bodies are manufactured here in-house in Eagle River, Alaska by a Veteran owned business. Custom designed and tested with the latest 3-D printing technology.
125mm jig is specifically for the ETS/ETSC/Rotex 125mm (5") Sander Models
150mm jig is specifically for the ETS/ETSC/Rotex 150mm (6") Sander Models
Both are designed to be used with Festool brand sand paper discs.
Thanks!
This alignment jig allows you to place your Festool Granat abrasive paper perfectly and precisely every-time! This will align the dust extraction holes exactly where they need to be while center the pad for optimal operation. These are compatible with all ETS, ETSC, and Rotex sanders manufactured by Festool.
Super easy steps:
1. Remove old Granat paper from sander
2. Place new Granat paper (Hook and Loop side up) onto jig with all alignment dowels passing through matching holes on paper
3. Place jig onto hook and loop pad on sander firmly sandwiching Granat paper between; aligning dowels with dust extraction vents on sander
4. Remove jig leaving paper behind
5. Go Sanding!!!
Please see video for quick operation guide.
Specific colors may be available by request- send message before order for confirmation, normally ships with varied colors that are currently in inventory. Normal colors shipped are Blue and Green, but depending on stock other colors may ship based on availability.
These jigs have been designed to be super strong and ready for years of hard work keeping your sanders operating smoothly! The jig bodies are manufactured here in-house in Eagle River, Alaska by a Veteran owned business. Custom designed and tested with the latest 3-D printing technology.
125mm jig is specifically for the ETS/ETSC/Rotex 125mm (5") Sander Models
150mm jig is specifically for the ETS/ETSC/Rotex 150mm (6") Sander Models
Both are designed to be used with Festool brand sand paper discs.
Thanks!